www.scaffoldframe.com

DI65 Scaffold plank is industrial grade lumber specifically designed for scaffolding platforms.

DI65 Scaffold plank is industrial grade lumber specifically designed for scaffolding platforms.

DI65 Scaffold plank is industrial grade lumber specifically designed for scaffolding platforms.

Z-Plank 2x10x8 Laminated Veneer Scaffolding Plank

• 2" X 10" X 8' Z-Plank Laminated Veneer Lumber (LVL)
• OSHA Stamped
• Size (2x10 and 2x12) Thickness – 1.5” nominal Widths – 9.25” and 11.75”
• Finish Unsanded faces, sawn edges Arrises removed by chamfering Ends painted burnt orange to inhibit moisture uptake
• Rated weight load is 50 p.s.f.
• Approximate Weight (lbs/ft) 9.25”– 3.9 9.5”– 4.0 11.75”– 4.9

DI65 Scaffold plank is industrial grade lumber specifically designed for scaffolding platforms.

DI65 Scaffold plank is industrial grade lumber specifically designed for scaffolding platforms.

Look! Great Sale on 12" Wide Laminate Scaffold Plank.

2x12x12 Laminated Veneer Scaffolding Plank

• 1.5 “ x 11.75 “ x 12’ 2.15E SPRUCE LAMINATED SCAFFOLD PLANK(LVL)
• OSHA Stamped
• Size (2x12) Thickness – 1.5” nominal Widths – 11.75”
• Finish Unsanded faces, sawn edges Arrises removed by chamfering Ends painted burnt orange to inhibit moisture uptake
• Rated weight load is 50 p.s.f.

DI65 Scaffold plank is industrial grade lumber specifically designed for scaffolding platforms.

Scaffold Frame's Perry (Sonny) mobile work replacement platforms are 5/8" Thick, 7-Ply exterior plywood made to American Plywood Assoc. Specifications for scaffold platforms.

• Heavy duty 5/8" Scaffolding deck with steel edge banding
• Maximum Load Capacity: 1000 lb
• Protective steel banding riveted in place - No Staples
• 1,000 lb. plus Heavy duty design workload of 75 P.S.F. with 4:1safety factor (OSHA 1910.29-1926.451)
• Made entirely in the U.S.

• Aluminum and plywood walk-board is one of the most versatile scaffolding planks in the industry.
• Broad aluminum hooks at the ends of the plank are secured with 4 heavy duty bolts.
• Aluminum and plywood planks are manufactured with 1/2 inch thick plywood decking.
• This Scaffold plank is 19 inches wide and 7 feet in length.
• The load capacity is 50lbs per foot.
• Weight is 45lbs.
• Made in the USA, this aluminum and plywood scaffolding plank will last for a long time.

• Aluminum and plywood walk-board is one of the most versatile scaffolding planks in the industry
  
• The design of the scaffold board is called a StealHead because the ends of the plank have a steal head that the hooks are attached to.
  
• Aluminum, plywood, and steel are used to manufacture the plank is high grade
  
• Walk-board is 19" wide and 7' in length.
  
• The load capacity of the scaffold plank is 50lbs per foot.
  
• Weight of board is 45lbs.
  
• Made in the USA, this aluminum and plywood scaffolding plank will last for a long time.

• Constructed of all aluminum, this aluminum scaffold walk plank has three broad replaceable hooks
• Actual dimensions are 19 inches wide and 7 feet in length
• Aluminum trusses underneath the scaffold board increase the max load capacity to 75lbs per foot
• Walk Plank comes complete with wind latches
• The top of the scaffold board is designed for maximum grip
• Weight on the scaffold plank is only 30lbs
• Great to buy for any scaffolding job whether it is residential or commercial
• Never have to replace

• Constructed of all aluminum, this aluminum scaffold walk plank has three broad replaceable hooks.
  
• Actual dimensions are 19 inches wide and 10 feet in length.
  
• Aluminum trusses underneath the scaffold board increase the max load capacity to 50lbs. per foot.
  
• Walk-board comes complete with wind latches.
  
• The top of the scaffold board is designed for maximum grip
  
• Weight on the scaffold plank is only 45lbs..
  
• Great to buy for any scaffolding job whether it is residential or commercial.
  
• Never have to replace

• Aluminum and plywood walk-board is one of the most versatile scaffolding planks in the industry
  
• The design of the scaffold board is called a STEELHEAD because the ends of the plank have a steel head that the hooks are attached to.
  
• Aluminum, plywood, and steel are used to manufacture the plank is high grade
  
• Walk-board is 28" wide and 7' in length.
  
• The load capacity of the scaffold plank is 75lbs per foot.
  
• Weight of board is 44lbs.
  
• Made in the USA, this aluminum and plywood scaffolding plank will last for a long time.

• Aluminum and plywood walk-board is one of the most versatile scaffolding planks in the industry
• The design of the scaffold board is called a STEELHEAD because the ends of the plank have a steel head that the hooks are attached to.
• Hinged hatch deck provides internal access
• Drop down aluminum ladder provides access to platform via hatch deck
• Aluminum, plywood, and steel are used to manufacture the plank is high grade
• Walk-board is 28" wide and 7' in length.
• The load capacity of the scaffold plank is 75lbs per foot.
• Weight of board is 44lbs.
• Made in the USA, this aluminum and plywood scaffolding plank will last for a long time.

Scaffold Frame carries all sizes of Aluminum Walk-Boards. If you do not see the size you want. Please call (877) 99-SCAFF.

• 12 feet long x 20 inches wide
• Aluminum staging planks are extruded
• OSHA and ANSI approved
• 2 man walk-board

Scaffold Frame carries all sizes of Aluminum Walk-Boards. If you do not see the size you want. Please call (877) 99-SCAFF.

• 24 inches wide x 12 feet long
• Aluminum staging planks are extruded
• OSHA and ANSI approved
• 2 man walk-board

Scaffold Frame carries all sizes of Aluminum Walk-Boards. If you do not see the size you want. Please call (877) 99-SCAFF.

• 16 feet long x 24 inches wide
• Aluminum staging planks are extruded
• OSHA and ANSI approved
• 2 man walk-board

Scaffold Frame carries all sizes of Aluminum Walk-Boards. If you do not see the size you want. Please call (877) 99-SCAFF.

• 24 feet long x 24 inches wide
• Aluminum staging planks are extruded
• OSHA and ANSI approved
• 2 man walk-board